=======================================================================
xPCB Layout - Version 116.0.506.6156
=======================================================================

Job Directory:        D:\Compulab VX.2\FT-USB4\PCB\

Design Status Report: D:\Compulab VX.2\FT-USB4\PCB\LogFiles\DesignStatus_00.txt

Sun Oct 06 12:26:01 2019

=======================================================================
DESIGN STATUS
=======================================================================
Board Size Extents  ............ 33.25 X 46.33 (mm)
Route Border Extents  .......... 33.144 X 45.314 (mm)
Actual Board Area  ............. 1,507.298 (mm)
Actual Route Area  ............. 1,427.27 (mm)

Placement Areas: Name            Available         Required          Required/Available
                 Entire Board    3,014.597 Sq. (mm)1,121.383 Sq. (mm)37.20 %

Pins  .......................... 340
Pins per Route Area  ........... 0.238 Pins/Sq. (mm)

Layers  ........................ 4
    Layer 1 is a signal layer
        Trace Widths  .......... 0.117, 0.122, 0.127, 0.152, 0.203, 0.254, 0.305, 0.635, 1.016
    Layer 2 is a Positive Plane Layer with nets
        GND
        Trace Widths  .......... None.
    Layer 3 is a Positive Plane Layer with nets
        +5VA
        GND
        Trace Widths  .......... None.
    Layer 4 is a signal layer
        Trace Widths  .......... 0.117, 0.122, 0.203, 0.305, 0.381, 0.508, 0.635, 1.016

Nets  .......................... 77
Connections  ................... 237
Open Connections  .............. 1
Differential Pairs  ............ 28
Differential Pair Names:   USB2_1N   USB2_1P
                           USB2_1N_F   USB2_1P_F
                           USB2_2N   USB2_2P
                           USB2_2N_F   USB2_2P_F
                           USB2_3N   USB2_3P
                           USB2_3N_F   USB2_3P_F
                           USB2_4N   USB2_4P
                           USB2_4N_F   USB2_4P_F
                           USB3_1_RXN   USB3_1_RXP
                           USB3_1_RXN_F   USB3_1_RXP_F
                           USB3_1_TXN   USB3_1_TXP
                           USB3_1_TXN_C   USB3_1_TXP_C
                           USB3_1_TXN_F   USB3_1_TXP_F
                           USB3_2_RXN   USB3_2_RXP
                           USB3_2_RXN_F   USB3_2_RXP_F
                           USB3_2_TXN   USB3_2_TXP
                           USB3_2_TXN_C   USB3_2_TXP_C
                           USB3_2_TXN_F   USB3_2_TXP_F
                           USB3_3_RXN   USB3_3_RXP
                           USB3_3_RXN_F   USB3_3_RXP_F
                           USB3_3_TXN   USB3_3_TXP
                           USB3_3_TXN_C   USB3_3_TXP_C
                           USB3_3_TXN_F   USB3_3_TXP_F
                           USB3_4_RXN   USB3_4_RXP
                           USB3_4_RXN_F   USB3_4_RXP_F
                           USB3_4_TXN   USB3_4_TXP
                           USB3_4_TXN_C   USB3_4_TXP_C
                           USB3_4_TXN_F   USB3_4_TXP_F
                           
Percent Routed  ................ 99.58 %

Netline Length  ................ 0.085 (mm)
Netline Manhattan Length  ...... 0.12 (mm)
Total Trace Length  ............ 845.099 (mm)

Trace Widths Used (mm)  ........ 0.117, 0.122, 0.127, 0.152, 0.203, 0.254, 0.305, 0.381, 0.508, 0.635, 1.016
Vias  .......................... 101
Via Span  Name                   Quantity
   1-4    via18rd8               26
          via20rd10              75

Teardrops....................... 0
    Pad Teardrops............... 0
    Trace Teardrops............. 0
    Custom Teardrops............ 0
Tracedrops...................... 0

Virtual Pins.................... 0
Guide Pins ..................... 0

Parts Placed  .................. 90
    Parts Mounted on Top  ...... 59
        SMD  ................... 46
        Through  ............... 4
        Test Points  ........... 0
        Mechanical  ............ 9
    Parts Mounted on Bottom  ... 31
        SMD  ................... 31
        Through  ............... 0
        Test Points  ........... 0
        Mechanical  ............ 0
    Embedded Components ........ 0
        Capacitors ............. 0
        Resistors .............. 0
    Edge Connector Parts  ...... 0

Parts not Placed  .............. 0

Nested Cells  .................. 0

Jumpers  ....................... 0

Through Holes  ................. 157
    Holes per Board Area  ...... 0.104 Holes/Sq. (mm)
Mounting Holes  ................ 4
