=======================================================================
xPCB Layout - Version 116.0.506.6156
=======================================================================

Job Directory:        D:\Compulab VX.2\FT-USB4\PCB\

Design Status Report: D:\Compulab VX.2\FT-USB4\PCB\LogFiles\DesignStatus_02.txt

Tue Oct 08 08:27:28 2019

=======================================================================
DESIGN STATUS
=======================================================================
Board Size Extents  ............ 33.25 X 46.33 (mm)
Route Border Extents  .......... 33.14 X 45.31 (mm)
Actual Board Area  ............. 1,507.3 (mm)
Actual Route Area  ............. 1,427.27 (mm)

Placement Areas: Name            Available         Required          Required/Available
                 Entire Board    3,014.6 Sq. (mm)  1,121.38 Sq. (mm) 37.20 %

Pins  .......................... 340
Pins per Route Area  ........... 0.24 Pins/Sq. (mm)

Layers  ........................ 4
    Layer 1 is a signal layer
        Trace Widths  .......... 0.12, 0.12, 0.13, 0.15, 0.2, 0.25, 0.3, 0.64, 1.02
    Layer 2 is a Positive Plane Layer with nets
        GND
        Trace Widths  .......... None.
    Layer 3 is a Positive Plane Layer with nets
        +5VA
        GND
        Trace Widths  .......... None.
    Layer 4 is a signal layer
        Trace Widths  .......... 0.12, 0.12, 0.2, 0.3, 0.38, 0.51, 0.64, 1.02

Nets  .......................... 77
Connections  ................... 237
Open Connections  .............. 0
Differential Pairs  ............ 28
Differential Pair Names:   USB2_1N   USB2_1P
                           USB2_1N_F   USB2_1P_F
                           USB2_2N   USB2_2P
                           USB2_2N_F   USB2_2P_F
                           USB2_3N   USB2_3P
                           USB2_3N_F   USB2_3P_F
                           USB2_4N   USB2_4P
                           USB2_4N_F   USB2_4P_F
                           USB3_1_RXN   USB3_1_RXP
                           USB3_1_RXN_F   USB3_1_RXP_F
                           USB3_1_TXN   USB3_1_TXP
                           USB3_1_TXN_C   USB3_1_TXP_C
                           USB3_1_TXN_F   USB3_1_TXP_F
                           USB3_2_RXN   USB3_2_RXP
                           USB3_2_RXN_F   USB3_2_RXP_F
                           USB3_2_TXN   USB3_2_TXP
                           USB3_2_TXN_C   USB3_2_TXP_C
                           USB3_2_TXN_F   USB3_2_TXP_F
                           USB3_3_RXN   USB3_3_RXP
                           USB3_3_RXN_F   USB3_3_RXP_F
                           USB3_3_TXN   USB3_3_TXP
                           USB3_3_TXN_C   USB3_3_TXP_C
                           USB3_3_TXN_F   USB3_3_TXP_F
                           USB3_4_RXN   USB3_4_RXP
                           USB3_4_RXN_F   USB3_4_RXP_F
                           USB3_4_TXN   USB3_4_TXP
                           USB3_4_TXN_C   USB3_4_TXP_C
                           USB3_4_TXN_F   USB3_4_TXP_F
                           
Percent Routed  ................ 100.00 %

Netline Length  ................ 0 (mm)
Netline Manhattan Length  ...... 0 (mm)
Total Trace Length  ............ 844.05 (mm)

Trace Widths Used (mm)  ........ 0.12, 0.12, 0.13, 0.15, 0.2, 0.25, 0.3, 0.38, 0.51, 0.64, 1.02
Vias  .......................... 99
Via Span  Name                   Quantity
   1-4    via18rd8               25
          via20rd10              74

Teardrops....................... 0
    Pad Teardrops............... 0
    Trace Teardrops............. 0
    Custom Teardrops............ 0
Tracedrops...................... 0

Virtual Pins.................... 0
Guide Pins ..................... 0

Parts Placed  .................. 90
    Parts Mounted on Top  ...... 59
        SMD  ................... 46
        Through  ............... 4
        Test Points  ........... 0
        Mechanical  ............ 9
    Parts Mounted on Bottom  ... 31
        SMD  ................... 31
        Through  ............... 0
        Test Points  ........... 0
        Mechanical  ............ 0
    Embedded Components ........ 0
        Capacitors ............. 0
        Resistors .............. 0
    RF Shapes .................. 0

    Edge Connector Parts  ...... 0

Parts not Placed  .............. 0

Nested Cells  .................. 0

Jumpers  ....................... 0

Through Holes  ................. 155
    Holes per Board Area  ...... 0.1 Holes/Sq. (mm)
Mounting Holes  ................ 4

Wirebonds
    Bondpads ................... 0
    Bond Wires ................. 0