
                            xPCB Layout ODB++ Output
                            ------------------------

                          04:26 PM Sunday, May 03, 2020
        Job Name: E:\Compulab VX.2\FT-M2B-Rev.1.1\PCB\FT-M2B-Rev.1.1.pcb


Configuration file found. Using the following settings.
        Output User Layers 
            dim mapped to usr_dim
            panel mapped to usr_panel
        Output ODB++ Documentation Layers
        Output User Layers 
        Using Placement Outline for package outline
        Remove NFP Pins: None
        Remove NFP Vias: None
        Units: Metric
        Read DRC Features
        Round Corners
        Flatten RF Nets
        Compress job
        Use Generate SilkScreen Data
        Output Board Outline

Output Dir: E:\Compulab VX.2\FT-M2B-Rev.1.1\PCB\Output\ODBpp\
Output Job Name: designodb
Processing Board Outline
Processing Layer Information
Processing Symbols
Processing Packages
Processing Components
        No Reference Designator Found - Using NRD0
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD1
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD2
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD3
        No Part Number Found - Using N_P_N_D0 for NRD3
        No Reference Designator Found - Using NRD4
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD5
        No Part Number Found - Using N_P_N_D0 for NRD5
        No Reference Designator Found - Using NRD6
        No Part Number Found - Using N_P_N_D0 for NRD6
        No Reference Designator Found - Using NRD7
        No Part Number Found - Using N_P_N_D0 for NRD7
        No Reference Designator Found - Using NRD8
        No Part Number Found - Using N_P_N_D0 for NRD8
        No Reference Designator Found - Using NRD9
        No Part Number Found - Using N_P_N_D0 for NRD9
Processing Nets
Processing Nets
Processing Layer Information
Processing Features
    Layer - layer_1
    WARNING: The arc at (0.1579924,2.5350000)(mm), (0.1579921,2.5349997)(mm) is being approximated to a line.
    Layer - layer_2
    Layer - layer_3
    Layer - layer_4
    WARNING: The arc at (0.4429920,0.3500000)(mm), (0.4429922,0.3500001)(mm) is being approximated to a line.
    Layer - spt
    Processing Solderpaste Data
    Layer - spb
    Processing Solderpaste Data
    Layer - smt
    Processing Soldermask Data
    Layer - smb
    Processing Soldermask Data
    Processing Assembly Data
    Processing Through Drill Drawing Data
    Processing Vias
    Processing Component Holes
    Processing Mounting Holes
    Processing Alternate Silkscreen Data
    WARNING: The arc at (0.1842837,2.7908987)(mm), (0.1842835,2.7908989)(mm) is being approximated to a line.
    WARNING: The arc at (0.1833389,2.8199539)(mm), (0.1833386,2.8199541)(mm) is being approximated to a line.
    WARNING: The arc at (0.1833386,2.8799539)(mm), (0.1833389,2.8799541)(mm) is being approximated to a line.
    WARNING: The arc at (0.1842835,2.9090091)(mm), (0.1842837,2.9090093)(mm) is being approximated to a line.
    WARNING: The arc at (0.1683044,2.5771557)(mm), (0.1683043,2.5771559)(mm) is being approximated to a line.
    WARNING: The arc at (0.1683043,2.7621953)(mm), (0.1683044,2.7621955)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194448,0.4901707)(mm), (0.2194446,0.4901709)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194446,0.4904961)(mm), (0.2194450,0.4904959)(mm) is being approximated to a line.
    WARNING: The arc at (0.2205284,0.4901711)(mm), (0.2205306,0.4901707)(mm) is being approximated to a line.
    WARNING: The arc at (0.2695402,0.4901707)(mm), (0.2695424,0.4901711)(mm) is being approximated to a line.
    WARNING: The arc at (0.2774370,0.4901709)(mm), (0.2774370,0.4901702)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194448,0.1298076)(mm), (0.2194446,0.1298078)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194446,0.3535582)(mm), (0.2194450,0.3535580)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194450,0.6079561)(mm), (0.2194446,0.6079560)(mm) is being approximated to a line.
    WARNING: The arc at (0.2194446,0.8385961)(mm), (0.2194448,0.8385963)(mm) is being approximated to a line.
    WARNING: The arc at (0.3023941,2.7908989)(mm), (0.3023939,2.7908987)(mm) is being approximated to a line.
    WARNING: The arc at (0.3023939,2.9090093)(mm), (0.3023941,2.9090091)(mm) is being approximated to a line.
    WARNING: The arc at (0.3375960,2.5771559)(mm), (0.3375958,2.5771557)(mm) is being approximated to a line.
    WARNING: The arc at (0.3375958,2.7621955)(mm), (0.3375960,2.7621953)(mm) is being approximated to a line.
    WARNING: The arc at (0.9717577,3.0456178)(mm), (0.9717579,3.0456176)(mm) is being approximated to a line.
    WARNING: The arc at (1.0354890,0.4901711)(mm), (1.0354912,0.4901707)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855868,0.1298078)(mm), (1.0855866,0.1298076)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855864,0.3535580)(mm), (1.0855868,0.3535582)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855868,0.4901709)(mm), (1.0855866,0.4901707)(mm) is being approximated to a line.
    WARNING: The arc at (1.0845008,0.4901707)(mm), (1.0845030,0.4901711)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855864,0.4904959)(mm), (1.0855868,0.4904961)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855868,0.6079560)(mm), (1.0855864,0.6079561)(mm) is being approximated to a line.
    WARNING: The arc at (1.0855866,0.8385963)(mm), (1.0855868,0.8385961)(mm) is being approximated to a line.
    WARNING: The arc at (0.3244856,0.2860848)(mm), (0.3244854,0.2860850)(mm) is being approximated to a line.
    WARNING: The arc at (0.3244854,0.3372661)(mm), (0.3244856,0.3372663)(mm) is being approximated to a line.
    WARNING: The arc at (0.3406117,0.6356880)(mm), (0.3406113,0.6356880)(mm) is being approximated to a line.
    WARNING: The arc at (0.3406113,0.6396632)(mm), (0.3406117,0.6396631)(mm) is being approximated to a line.
    WARNING: The arc at (0.3760255,0.6042108)(mm), (0.3760256,0.6042112)(mm) is being approximated to a line.
    WARNING: The arc at (0.3878747,0.6042112)(mm), (0.3878748,0.6042108)(mm) is being approximated to a line.
    WARNING: The arc at (0.3878748,0.6711404)(mm), (0.3878747,0.6711400)(mm) is being approximated to a line.
    WARNING: The arc at (0.3760256,0.6711400)(mm), (0.3760255,0.6711404)(mm) is being approximated to a line.
    WARNING: The arc at (0.3914149,0.2860850)(mm), (0.3914147,0.2860848)(mm) is being approximated to a line.
    WARNING: The arc at (0.3914147,0.3372663)(mm), (0.3914149,0.3372661)(mm) is being approximated to a line.
    WARNING: The arc at (0.4232889,0.6356880)(mm), (0.4232885,0.6356880)(mm) is being approximated to a line.
    WARNING: The arc at (0.4232885,0.6396631)(mm), (0.4232889,0.6396632)(mm) is being approximated to a line.
    WARNING: The arc at (0.6990099,0.2970459)(mm), (0.6990094,0.2970455)(mm) is being approximated to a line.
    WARNING: The arc at (0.6228908,0.2970455)(mm), (0.6228904,0.2970459)(mm) is being approximated to a line.
    WARNING: The arc at (0.6226935,0.2183053)(mm), (0.6226940,0.2183057)(mm) is being approximated to a line.
    WARNING: The arc at (0.6992063,0.2183057)(mm), (0.6992067,0.2183053)(mm) is being approximated to a line.
    WARNING: The arc at (0.3749187,0.2673538)(mm), (0.3749176,0.2673534)(mm) is being approximated to a line.
    WARNING: The arc at (0.3720351,0.2659872)(mm), (0.3720344,0.2659869)(mm) is being approximated to a line.
    WARNING: The arc at (0.3702627,0.2659869)(mm), (0.3702626,0.2659869)(mm) is being approximated to a line.
    WARNING: The arc at (0.3700173,0.2660219)(mm), (0.3700172,0.2660219)(mm) is being approximated to a line.
    WARNING: The arc at (0.3698070,0.2661621)(mm), (0.3698069,0.2661622)(mm) is being approximated to a line.
    WARNING: The arc at (0.3697019,0.2663373)(mm), (0.3697018,0.2663374)(mm) is being approximated to a line.
    WARNING: The arc at (0.3697018,0.2669682)(mm), (0.3697019,0.2669683)(mm) is being approximated to a line.
    WARNING: The arc at (0.3698069,0.2671784)(mm), (0.3698070,0.2671785)(mm) is being approximated to a line.
    WARNING: The arc at (0.3700172,0.2673187)(mm), (0.3700173,0.2673187)(mm) is being approximated to a line.
    WARNING: The arc at (0.3702626,0.2673538)(mm), (0.3702627,0.2673538)(mm) is being approximated to a line.
    WARNING: The arc at (0.3755976,0.2675693)(mm), (0.3755972,0.2675692)(mm) is being approximated to a line.
    WARNING: The arc at (0.3719794,0.2722590)(mm), (0.3719794,0.2722590)(mm) is being approximated to a line.
    WARNING: The arc at (0.3718743,0.2724342)(mm), (0.3718743,0.2724343)(mm) is being approximated to a line.
    WARNING: The arc at (0.3770920,0.2679188)(mm), (0.3770915,0.2679187)(mm) is being approximated to a line.
    WARNING: The arc at (0.3771003,0.2679203)(mm), (0.3770997,0.2679202)(mm) is being approximated to a line.
    WARNING: The arc at (0.3822813,0.2724343)(mm), (0.3822813,0.2724342)(mm) is being approximated to a line.
    WARNING: The arc at (0.3821762,0.2722590)(mm), (0.3821762,0.2722590)(mm) is being approximated to a line.
    WARNING: The arc at (0.3790213,0.2681311)(mm), (0.3790207,0.2681311)(mm) is being approximated to a line.
    WARNING: The arc at (0.6143494,0.2171996)(mm), (0.6143493,0.2171996)(mm) is being approximated to a line.
    WARNING: The arc at (0.6125423,0.2169989)(mm), (0.6125422,0.2169989)(mm) is being approximated to a line.
    WARNING: The arc at (0.6115785,0.2168784)(mm), (0.6115785,0.2168784)(mm) is being approximated to a line.
    WARNING: The arc at (0.6105344,0.2167579)(mm), (0.6105343,0.2167583)(mm) is being approximated to a line.
    WARNING: The arc at (0.6115784,0.2168788)(mm), (0.6115785,0.2168788)(mm) is being approximated to a line.
    WARNING: The arc at (0.6125422,0.2169993)(mm), (0.6125422,0.2169993)(mm) is being approximated to a line.
    WARNING: The arc at (0.6134658,0.2171197)(mm), (0.6134659,0.2171197)(mm) is being approximated to a line.
    WARNING: The arc at (0.6143493,0.2172000)(mm), (0.6143493,0.2172000)(mm) is being approximated to a line.
    WARNING: The arc at (0.6174818,0.2133447)(mm), (0.6174816,0.2133445)(mm) is being approximated to a line.
    WARNING: The arc at (0.6169596,0.2133445)(mm), (0.6169595,0.2133445)(mm) is being approximated to a line.
    WARNING: The arc at (0.6163170,0.2133847)(mm), (0.6163170,0.2133847)(mm) is being approximated to a line.
    WARNING: The arc at (0.6155942,0.2134248)(mm), (0.6155942,0.2134248)(mm) is being approximated to a line.
    WARNING: The arc at (0.6147911,0.2135052)(mm), (0.6147910,0.2135052)(mm) is being approximated to a line.
    WARNING: The arc at (0.6138674,0.2135855)(mm), (0.6138674,0.2135855)(mm) is being approximated to a line.
    WARNING: The arc at (0.6128635,0.2136658)(mm), (0.6128635,0.2136658)(mm) is being approximated to a line.
    WARNING: The arc at (0.6117391,0.2137863)(mm), (0.6117390,0.2137863)(mm) is being approximated to a line.
    WARNING: The arc at (0.6108156,0.2133449)(mm), (0.6108157,0.2133448)(mm) is being approximated to a line.
    WARNING: The arc at (0.6132251,0.2074416)(mm), (0.6132250,0.2074414)(mm) is being approximated to a line.
    WARNING: The arc at (0.6092494,0.2061563)(mm), (0.6092491,0.2061565)(mm) is being approximated to a line.
    WARNING: The arc at (0.6088074,0.2078029)(mm), (0.6088074,0.2078030)(mm) is being approximated to a line.
    WARNING: The arc at (0.6073220,0.2126218)(mm), (0.6073219,0.2126217)(mm) is being approximated to a line.
    WARNING: The arc at (0.6068802,0.2121800)(mm), (0.6068801,0.2121800)(mm) is being approximated to a line.
    WARNING: The arc at (0.6057156,0.2111359)(mm), (0.6057156,0.2111359)(mm) is being approximated to a line.
    WARNING: The arc at (0.6050330,0.2105336)(mm), (0.6050329,0.2105335)(mm) is being approximated to a line.
    WARNING: The arc at (0.6023825,0.2083650)(mm), (0.6023822,0.2083651)(mm) is being approximated to a line.
    WARNING: The arc at (0.6000130,0.2116580)(mm), (0.6000130,0.2116583)(mm) is being approximated to a line.
    WARNING: The arc at (0.6018201,0.2129031)(mm), (0.6018201,0.2129031)(mm) is being approximated to a line.
    WARNING: The arc at (0.6025429,0.2133449)(mm), (0.6025430,0.2133449)(mm) is being approximated to a line.
    WARNING: The arc at (0.6033461,0.2138268)(mm), (0.6033462,0.2138268)(mm) is being approximated to a line.
    WARNING: The arc at (0.6041894,0.2143086)(mm), (0.6041894,0.2143087)(mm) is being approximated to a line.
    WARNING: The arc at (0.6050728,0.2147906)(mm), (0.6050729,0.2147906)(mm) is being approximated to a line.
    WARNING: The arc at (0.6051131,0.2158343)(mm), (0.6051130,0.2158343)(mm) is being approximated to a line.
    WARNING: The arc at (0.6042296,0.2163563)(mm), (0.6042295,0.2163564)(mm) is being approximated to a line.
    WARNING: The arc at (0.6033863,0.2168784)(mm), (0.6033862,0.2168784)(mm) is being approximated to a line.
    WARNING: The arc at (0.6033864,0.2168787)(mm), (0.6033865,0.2168787)(mm) is being approximated to a line.
    WARNING: The arc at (0.6042297,0.2163567)(mm), (0.6042298,0.2163567)(mm) is being approximated to a line.
    WARNING: The arc at (0.6051132,0.2158346)(mm), (0.6051133,0.2158346)(mm) is being approximated to a line.
    WARNING: The arc at (0.6060368,0.2153126)(mm), (0.6060368,0.2153123)(mm) is being approximated to a line.
    WARNING: The arc at (0.6050731,0.2147902)(mm), (0.6050730,0.2147902)(mm) is being approximated to a line.
    WARNING: The arc at (0.6041896,0.2143083)(mm), (0.6041896,0.2143083)(mm) is being approximated to a line.
    WARNING: The arc at (0.6033463,0.2138265)(mm), (0.6033463,0.2138265)(mm) is being approximated to a line.
    WARNING: The arc at (0.6025431,0.2133446)(mm), (0.6025431,0.2133446)(mm) is being approximated to a line.
    WARNING: The arc at (0.6057153,0.2111362)(mm), (0.6057154,0.2111362)(mm) is being approximated to a line.
    WARNING: The arc at (0.6063177,0.2116984)(mm), (0.6063177,0.2116984)(mm) is being approximated to a line.
    WARNING: The arc at (0.6068798,0.2121803)(mm), (0.6068799,0.2121803)(mm) is being approximated to a line.
    WARNING: The arc at (0.6073216,0.2126220)(mm), (0.6073217,0.2126221)(mm) is being approximated to a line.
    WARNING: The arc at (0.6076830,0.2130236)(mm), (0.6076834,0.2130235)(mm) is being approximated to a line.
    WARNING: The arc at (0.6104941,0.2139068)(mm), (0.6104942,0.2139071)(mm) is being approximated to a line.
    WARNING: The arc at (0.6117391,0.2137867)(mm), (0.6117391,0.2137867)(mm) is being approximated to a line.
    WARNING: The arc at (0.6138674,0.2135859)(mm), (0.6138675,0.2135859)(mm) is being approximated to a line.
    WARNING: The arc at (0.6147911,0.2135056)(mm), (0.6147911,0.2135056)(mm) is being approximated to a line.
    WARNING: The arc at (0.6155942,0.2134252)(mm), (0.6155943,0.2134252)(mm) is being approximated to a line.
    WARNING: The arc at (0.6163170,0.2133851)(mm), (0.6163171,0.2133851)(mm) is being approximated to a line.
    Attribute text string "*" of attribute ".string" is modified to "-" to adhere with the ODB++ spec.
Creating package
Packaging completed
Process Completed at ....
04:26:45 PM Sunday, May 03, 2020